ER 1681® RTD

Fused cast

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) for paving applications with a wide range of sizes

Typical application Chemical and physical properties Storage
Fused cast

Typical application

Bottom glass contact.
Patching and sidewall back up.

The Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia, ER 1681® RTD solution is available in standard thicknesses of 3" (75mm), 4" (100mm), 4,7" (120mm) and 16" (150mm).

Chemical and physical properties

Microstructure

Microstructure of ER 1681

Typical chemical composition

 
 

Typical crystallographic analysis

 
 

Physical characteristics

Description International standards British standards
Refractoriness under load of 2.105 Pa 1,700°C 3,092°F
Cold crushing strength 300Mpa 43,511psi
Typical bulk density 3.72g/cm3 232pcf

Expansion curve

Expansion curve fused cast ER 1681 RTD

Thermal conductivity curve

Thermal conductivity curve fused cast ER 1681 RTD

Electrical resistivity curve

Electrical resistivity curve fused cast ER 1681 RTD

Storage

The Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia, ER 1681® RTD solution must be stored in a dry environment protected from weather conditions.

Related products

Fused cast

ER 1681® DALLE TJ

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) paving with fully ground joint faces for tight joint application.

Go to product
Fused cast

ER 2010 RIC RTD

Void-free electrofused Alumina-zirconia-silica (AZS) tiles with 39% yttria-doped zirconia

Alumina-zirconia-silica (AZS) for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Go to product
Sintered

ERMOLD 300

Bonded alumina-zirconia-silica (AZS) with 30% zirconia

Made of alumina-zirconia-silica (AZS) grains. High resistance to glass corrosion. Available in large format with large range of thickness.

Go to product
Fused cast

ER 1711® RT

Void-free electrofused alumina-zirconia-silica (AZS) with 40% zirconia solution

Alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.

Go to product
Fused cast

JARGAL® M RT DALLE

Void-free, electrofused 95% alumina (alpha-beta alumina) tiles

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.
Void-free structure enabling longer lifetime.

Go to product