ERGAL® 05 CEMENT
Alumina cement for bottom solutions
Alumina cement to seal and joint Alumina surfaces.
Typical application
Easy-to-use cement for jointing and sealing Alumina blocks.
ERGAL® 05 CEMENT also applied on ERGAL® SL CAST concrete for levelling small surface.
Due to its high alumina content it cannot be used in contact with silica. For application with contact with silica check out the ERPLAST® Z PATCH.
Chemical and physical properties
Typical chemical composition
Typical crystallographic analysis
- corundum
Physical characteristics
| Description | International standards | British standards |
|---|---|---|
| Maximum diameter | 0.5mm | 35Mesh |
| Typical bulk density | 2.5g/cm3 | 156pcf |
Instructions of use
Chemical setting with 6 to 15% drinkable water by weight, depending on application
Packaging and storage
- 50kg drum
- Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C
Related products
Alumina cement for bottom solutions
Alumina mortar ensuring flatness between ERGAL® SL CAST and JARGAL® M RT DALLE paving.
Alumina monolithic bottom solution
Self levelling high-purity alumina concrete safety sublayer with excellent glass contact properties.
Alumina mortar for sealing and jointing
High alumina heat-setting cement to joint and seal Alumina and alumina-zirconia-silica (AZS) refractories.
Regular cast, electrofused 95% alumina (alpha-beta alumina)
Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.