ERPLAST® 05 CEMENT

Range
Monolithics
Subtitle

AZS sealing cement

Description

Fine grains AZS cement to seal and joint AZS surfaces.

Chemical and physical properties

Typical chemical composition

 
 

Typical crystallographic analysis

Main phase: 

  • corundum
  • zirconia

Physical characteristics

Description International standards British standards
Maximum grain diameter 0.5mm 35Mesh
Typical bulk density 3g/cm3 187pcf

Typical application

Easy-to-use cement with good malleability at low temperatures. Ideal solution for jointing during construction and repair operations : adhesion of insulation panels, sealing of AZS blocks and patching tiles or insulation, jointing between tuckstones and sidewalls, etc..

ERPLAST® 05 CEMENT has a good corrosion resistance and good adhesion properties.

Due to its high alumina content it cannot be used in contact with silica. For application with contact with silica check out the ERPLAST® Z PATCH.

Instructions of use

Chemical setting with 5 to 6% drinkable water by weight.

Packaging and shelf life

  • 50kg drum
  • 12 months in dry conditions

Related products

Monolithics

ERPLAST® 20 CEMENT

AZS sealing cement

AZS cement to seal and joint AZS surfaces.

Monolithics

ERPLAST® Z PATCH

Zircon sealing patch

Zircon mix to seal joints of mixed material including silica.

Monolithics

A-621

Alumina mortar for sealing and jointing

High alumina heat-setting cement to joint and seal Alumina and AZS refractories.

Monolithics

HMS-HEATSET

Alumina mortar for sealing and jointing

High alumina heat-setting cement to joint and seal Alumina and AZS refractories.

Fused cast

ER 1711® RT

Void-free electrofused AZS (alumina-zirconia-silica) with 40% zirconia.

AZS material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.

Fused cast

ER 1851 RN LOWEX®

Regular cast electrofused AZS (alumina-zirconia-silica) with 36% zirconia and a low silicate phase (14%)

Low exudation and high creep resistance AZS.

Good resistance to alkali vapour and carry over.

Fused cast

ER 1681® RN

Regular cast, electrofused AZS (alumina-zirconia-silica) with 32% zirconia

Good castability AZS enabling complex and varied shapes and sizes