ERSOL® 06 CEMENT

Range
Monolithics
Subtitle

AZS cement for bottom solutions

Description

AZS cement ensures the flatness between the ERSOL® cast solutions and the ER 1681® tile paving.

Chemical and physical properties

Typical chemical composition

 
 

Typical crystallographic analysis

Main phase:

  • corundum
  • monoclinic zirconia

Physical characteristics

Description International standards British standards
Maximum grain diameter 0.6mm 30Mesh
Typical bulk density 3.1g/cm3 194pcf

Typical application

Easy-to-use organic setting cement to be applied on ERSOL® MAX FLOW or ERSOL® SL concrete safety layers before AZS paving installation.

Its fine grain and narrow grain size distribution ensures a uniform layer.

For vertical applications, refer to ERPLAST® 05 CEMENT.

Instructions of use

Organic setting with 8% to 10% drinkable water by weight.

Packaging and shelf life

  • 25kg bag
  • 12 months in dry conditions

Related products

Monolithics

S-CEMENT

AZS cement for bottom solutions

AZS cement ensures the flatness before ER 1681® paving tiles installation.

Fused cast

ER 1681® DALLE TJ

Void-free electrofused AZS (alumina-zirconia-silica) tiles with 32% zirconia

AZS paving with fully ground joint faces for tight joint application

Fused cast

ER 2010 RIC RTD

Void-free electrofused AZS (alumina-zirconia-silica) tiles with 39% yttria-doped zirconia

AZS for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Fused cast

ER 1681® RTD

Void-free electrofused AZS (alumina-zirconia-silica) tiles with 32% zirconia

AZS for paving applications with a wide range of sizes

Fused cast

ER 1711® RT

Void-free electrofused AZS (alumina-zirconia-silica) with 40% zirconia.

AZS material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.