ERSOL® MAX FLOW

Range
Monolithics
Subtitle

AZS monolithic bottom solution

Description

AZS concrete safety layer with high corrosion resistance and self-placing properties.

Chemical and physical properties

Microstructure

Image
ERSOL MAX FLOW microstructure

Typical chemical composition

 
 

Typical crystallographic analysis

Main phase:

  • corundum
  • monoclinic zirconia

Physical characteristics

Description International standards British standards
Maximum grain diameter 5mm 4Mesh
Typical bulk density 3.08g/cm3 192pcf

Typical application

ERSOL® MAX FLOW is used in combination with ERSOL® 06 CEMENT as a safety layer under ER 1681® DALLE TJ or ER 1681® RTD TILES in bottom paving.

ERSOL® MAX FLOW provides excellent corrosion resistance to reduce risk of glass infiltration and corrosion by polymetallic elements from glass cullet.

Usually installed in two separate layers.

Instructions of use

Installation instructions

Hydraulic setting with 5.7% (+/-0.1%) drinkable water by weight.

Packaging and shelf life

  • 25kg bag
  • 12 months in dry conditions

Related products

Monolithics

ERSOL® 06 CEMENT

AZS cement for bottom solutions

AZS cement ensures the flatness between the ERSOL® cast solutions and the ER 1681® tile paving.

Fused cast

ER 1681® DALLE TJ

Void-free electrofused AZS (alumina-zirconia-silica) tiles with 32% zirconia

AZS paving with fully ground joint faces for tight joint application

Monolithics

S-CEMENT

AZS cement for bottom solutions

AZS cement ensures the flatness before ER 1681® paving tiles installation.

Fused cast

ER 2010 RIC RTD

Void-free electrofused AZS (alumina-zirconia-silica) tiles with 39% yttria-doped zirconia

AZS for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Fused cast

ER 1681® RTD

Void-free electrofused AZS (alumina-zirconia-silica) tiles with 32% zirconia

AZS for paving applications with a wide range of sizes

Fused cast

ER 1711® RT

Void-free electrofused AZS (alumina-zirconia-silica) with 40% zirconia.

AZS material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.