AL 100S MORTAR
High alumina jointing mortar
Highest alumina content mortar providing remarkable vapours corrosion resistance.
Typical application
AL 100S mortar is used for jointing AL 100 sintered bricks in superstructure application.
Highly resistant to vapour environment with its high alumina content and its extremely low level of silica.
Use 200kg of AL 100S mortar per cubic meter of AL 100 bricks.
Chemical and physical properties
Typical chemical composition
Typical crystallographic analysis
- Corundum
Physical characteristics
| Description | International standards | British standards |
|---|---|---|
| Maximum diameter | 0.2mm | 70Mesh |
| Typical bulk density | 2g/cm3 | 125pcf |
Instructions of use
Organic/ceramic setting with 40% drinkable water by weight
Packaging and storage
- 25kg bag
- Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C
Related products
Sintered high-alumina 99%
Highest alumina content sintered material. Remarkable resistance to vapours corrosion. Available in standard brick format.
Alumina mortar for sealing and jointing
High alumina heat-setting cement to joint and seal Alumina and alumina-zirconia-silica (AZS) refractories.
Alumina cement for bottom solutions
Alumina mortar ensuring flatness between ERGAL® SL CAST and JARGAL® M RT DALLE paving.
Alumina cement for bottom solutions
Alumina cement to seal and joint Alumina surfaces.