Fused case

Fused cast products

SEFPRO places particular emphasis on three fundamental properties of fused cast products which influence their performance: oxidation level of the melted liquid, size and position of the shrinkage cavities, and tight control over final product chemistry.

Fused cast
Sintered
Cruciform
Monolithics
Expendables

Product range overview

Material
Alumina-Zirconia-Silica (AZS)
High alumina
High zirconia
Regular cast
The cavity is located within the block.
Alumina-Zirconia-Silica (AZS)
ER 1681® RN

Good castability alumina-zirconia-silica (AZS) enabling complex and varied shapes and sizes

Go to product
MONOFRAX® CS-3 RC

Good castability Alumina-zirconia-silica (AZS) enabling complex and varied shapes and sizes.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1681 RN solution.

Go to product
ER 1851 RN LOWEX®

Low exudation and high creep resistance AZS.

Good resistance to alkali vapour and carry over.

Go to product
High alumina
JARGAL® M RN

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.

Go to product
MONOFRAX® M RC

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to JARGAL® M RN solution.

Go to product
SCIMOS M RC

Excellent glass contact properties with extremely low defect potential.

High resistant to alkali vapor and creep for superstructure application.

Go to product
SCIMOS H RC

High creep-resistance material and neutrality to alkali vapor environments.

Go to product
High zirconia
End cast
Reinforced casting, part of the cavity is removed (soldier blocks).
Alumina-Zirconia-Silica (AZS)
ER 1685 RR

High corrosion resistance AZS for simple rectangular shapes. Controlled casting cavity located at the bottom part of the block.

Go to product
MONOFRAX® CS-4 EPIC

High corrosion resistance alumina-zirconia-silica (AZS) solution for simple rectangular shapes. Controlled casting cavity located at the bottom part of the block.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1685 RR solution.

Go to product
ER 1699 RS

High corrosion resistance AZS for simple rectangular shapes. The very reduced casting cavity and high zirconia content increase resistance to corrosion.

Go to product
ER 1711® RR

Alumina-Zirconia-Silica(AZS) material with highest corrosion resistance for simple rectangular shapes. Controlled casting cavity located at the bottom part of the block.

Go to product
MONOFRAX® CS-5 EPIC

The alumina-zirconia-silica (AZS) material with highest corrosion resistance for simple rectangular shapes. Controlled casting cavity located at the bottom part of the block.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1711 RR solution.

Go to product
High alumina
High zirconia
Void-free
Total filling, the area where the cavity is located is sawed off.
Alumina-Zirconia-Silica (AZS)
ER 1681® RT

AZS with good castability enabling complex and varied shapes and sizes. Void-free structure enabling longer lifetime.

Go to product
MONOFRAX® CS-3 Epic-3 & DCL

Alumina-zirconia-silica (AZS) with good castability enabling complex and varied shapes and sizes. Void-free structure enabling longer lifetime.
DCL grade apply typically for thickness below 150 mm (6"").
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1681 RT solution.

Go to product
ER 1681® DALLE TJ

AZS paving with fully ground joint faces for tight joint application

Go to product
ER 1681® RTD

Alumina-Zirconia-Silica (AZS) for paving applications with a wide range of sizes

Go to product
MONOFRAX® CS-3 DCL tile

Alumina-zirconia-silica (AZS) tiles solutions for paving applications with a wide range of sizes.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1681 RTD solution.

Go to product
ER 1685 RT

High corrosion resistance Alumina-Zirconia-Silica (AZS) for simple rectangular shapes. Essentially free of casting cavity which allows a very homogeneous internal structure and corrosion resistance.

Go to product
MONOFRAX® CS-4 Epic-3

High corrosion resistance alumina-zirconia-silica (AZS) solution for simple rectangular shapes. Essentially free of casting cavity which allows a very homogeneous internal structure and corrosion resistance.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1685 RT solution.

Go to product
ER 1711® RT

Alumina-Zirconia-Silica(AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.

Go to product
MONOFRAX® CS-5 Epic-3 & DCL

The alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.
DCL grade apply typically for thickness below 150mm (6"" ).
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1711 RT solution.

Go to product
ER 2010 RIC RT

AZS material with the highest corrosion resistance for simple rectangular shapes. The only AZS allowing joint closure at operating conditions.

Go to product
ER 2010 RIC RTD

AZS for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Go to product
ER 1851 RT LOWEX®

Low exudation and high creep resistance AZS.
Good resistance to alkali vapours and carry over.
Void-free structure enabling longer lifetime.

Go to product
High alumina
JARGAL® M RT

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.
Void-free structure enabling longer lifetime.

Go to product
MONOFRAX® M DCL

Excellent glass contact properties with an extremely low defect potential.
High resistance to alkali vapor and creep for superstructure application.
Void-free structure enabling a longer service life. 
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to JARAL®M RT solution.

Go to product
JARGAL® M RT DALLE

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.
Void-free structure enabling longer lifetime.

Go to product
JARGAL® M RTS

The best possible glass contact properties to reduce risk of glass defects. Complete surface grinding with high surface quality.
Only available in void-free quality.

Go to product
JARGAL® H RT IMP®

High creep-resistance material unaffected by alkali vapor environments.
Void-free structure enabling longer lifetime.

Go to product
MONOFRAX® H DCL

High creep-resistance material unaffected by alkali vapor environments.
Void-free structure enabling longer service life.  
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to JARGAL®H RT solution.

Go to product
SCIMOS M DCL

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.
Void-free structure enabling longer lifetime.

Go to product
SCIMOS H DCL

High creep-resistance material unaffected by alkali vapor environments.
Void-free structure enabling longer lifetime.

Go to product
High zirconia
XiROC® 95 RT

Excellent corrosion resistance and glass contact properties. Very low solubility in contact with glass.

Go to product
ER 1195 RT

Excellent corrosion resistance and glass contact properties with the lowest potential for seed and blister formation.

Go to product
XiLEC® 9 RT

Excellent corrosion resistance and glass contact properties combined with a very high and stable electrical resistivity while providing the lowest potential for seed and blister formation.

Go to product
SCIMOS CZ DCL

Excellent corrosion resistance and glass contact properties combined with a high electrical resistivity

Go to product
SCIMOS MCZ DCL

Excellent corrosion resistance and glass contact properties combined with a high electrical resistivity

Go to product
MONOFRAX® ZHR Epic-3

Excellent corrosion resistance and glass contact properties combined with a high electrical resistivity.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to SCIMOS MCZ DCL solution.

Go to product
SCIMOS UZ DCL

Excellent corrosion resistance and glass contact properties with the lowest potential for seed and blister formation.

Go to product
SCIMOS Z DCL

Excellent corrosion resistance and glass contact properties.

Go to product
MONOFRAX® Z Epic-3

Excellent corrosion resistance and glass contact properties.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to SCIMOS Z DCL solution. 

Go to product