MONOFRAX® H DCL

Fused cast

Void-free electrofused 93% alumina (beta alumina)

High creep-resistance material unaffected by alkali vapor environments.
Void-free structure enabling longer service life.  
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to JARGAL®H RT solution.

Typical application Chemical and Physical Properties Storage
Fused cast

Typical application

The void-free electrofused 93% with alumina (beta alumina), MONOFRAX® H DCL solution is specific to superstructure application:

  • downstream part of the superstructure in high quality glass furnaces, including crowns.

Chemical and Physical Properties

Microstructure

Microstructure H DCL
 
 

Physical characteristics

Description International standards British standards
Refractoriness under load of 2.105 Pa 1,750°C 3,182°F
Cold crushing strength >50Mpa >7,251psi
Typical bulk density 3.12g/cm3 195pcf

Storage

The void-free electrofused 93% alumina (beta alumina) solution must be stored in a dry environment protected from weather conditions.

Related products

Fused cast

MONOFRAX® M DCL

Void-free electrofused with 94% alumina (alpha-beta alumina)

Excellent glass contact properties with an extremely low defect potential.
High resistance to alkali vapor and creep for superstructure application.
Void-free structure enabling a longer service life. 
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to JARGAL®M RT solution.

Go to product
Fused cast

JARGAL® H RT IMP®

Void-free, electrofused 92% alumina (beta alumina)

High creep-resistance material unaffected by alkali vapor environments.
Void-free structure enabling longer lifetime.

Go to product
Fused cast

JARGAL® M RT

Void-free, electrofused 95% alumina (alpha-beta alumina)

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.
Void-free structure enabling longer lifetime.

Go to product
Fused cast

ER 1851 RN LOWEX®

Regular cast electrofused Alumina-Zirconia-Silica (AZS) with 36% zirconia and a low silicate phase (14%)

Low exudation and high creep resistance.
Good resistance to alkali vapour and carry over.

Go to product
Monolithics

ERGAL® 05 CEMENT

Alumina cement for bottom solutions

Alumina cement to seal and joint Alumina surfaces.

Go to product