ER 1851 RN LOWEX®

Fused cast

Regular cast electrofused Alumina-Zirconia-Silica (AZS) with 36% zirconia and a low silicate phase (14%)

Low exudation and high creep resistance.
Good resistance to alkali vapour and carry over.

Chemical and physical properties Storage
Fused cast

Typical application

Specific for superstructure including Crown

ER 1851 RN LOWEX® is designed for any superstructure zones sensitive to glass defect generation, corrosion and creep.

Available with TuckPro solution

Discover TuckPro solution

Chemical and physical properties

Microstructure 

Microstructure of ER 1851 RN LOWEX and ER 1851 RT LOWEX

Typical chemical composition

 
 

Typical crystallographic analysis

 
 

Physical characteristics

Description International standards British standards
Refractoriness under load of 2.105 Pa 1,700°C 3,092°F
Cold crushing strength ≥350Mpa ≥50,763psi
Typical bulk density 3.72g/cm3 232pcf

Expansion curve

0.00.20.40.60.81.01.21.402004006008001,0001,2001,400Linear expansion (%)Temperature (°C)
EXPANSION CURVE FUSED CAST ER 1851.

Thermal conductivity curve

012345602004006008001,0001,2001,4001,600Thermal conductivity (W/m⋅K)Temperature (°C)
CONDUCTIVITY CURVE FUSED CAST ER 1851

Electrical resistivity curve

101001,00010,0008001,0001,2001,4001,600Electrical resistivity (ohm-cm)Temperature (°C)
RESISTIVITY CURVE FUSED CAST ER 1851

Storage

The regular cast electrofused Alumina-Zirconia-Silica (AZS) with 36% zirconia and a low silicate phase (14%), ER 1851 RN LOWEX®, must be stored in a dry environment protected from weather conditions.

Related products

Fused cast

ER 1851 RT LOWEX®

Void-free electrofused alumina-zirconia-silica (AZS) with 36% zirconia and a low silicate phase (14%)

Low exudation and high creep resistance alumina-zirconia-silica (AZS).
Good resistance to alkali vapours and carry over.
Void-free structure enabling longer lifetime.

Go to product
Fused cast

ER 1681® RN

Regular cast, electrofused Alumina-Zirconia-Silica (AZS) with 32% zirconia

Good castability Alumina-Zirconia-Silica (AZS) enabling complex and varied shapes and sizes.

Go to product
Fused cast

ER 1195 RT

Void-free electrofused 94% zirconia

Excellent corrosion resistance and glass contact properties with the lowest potential for seed and blister formation.

Go to product
Fused cast

ER 1711® RT

Void-free electrofused alumina-zirconia-silica (AZS) with 40% zirconia solution

Alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.

Go to product
Fused cast

JARGAL® M RN

Regular cast, electrofused 95% alumina (alpha-beta alumina)

Excellent glass contact properties with extremely low defect potential.
High resistant to alkali vapor and creep for superstructure application.

Go to product
Monolithics

ERPLAST® Z PATCH

Zircon sealing patch

Zircon mix to seal joints of mixed material including silica.

Go to product