ER 2010 RIC RT

Range
Fused cast
Subtitle

Void-free electrofused alumina-zirconia-silica (AZS) with 39% yttria-doped zirconia

Description

The alumina-zirconia-silica (AZS) material with the highest corrosion resistance for simple rectangular shapes. The only AZS allowing joint closure at operating conditions.

Typical application

The void-free electrofused alumina-zirconia-silica (AZS) with 39% yttria-doped zirconia, ER 2010 RIC RT solution is mainly used as melting sidewall applications for flame furnaces.


ER 2010 RIC RT is specifically dedicated to sidewalls in clear and extra clear glass furnaces (reduced iron content), enabling significant reduction of low-temperature blistering.
 

Chemical and physical properties

Microstructure

Image
Microstructure of ER 2010 RIC

Typical chemical composition

 
 

Typical crystallographic analysis

 
 

Physical characteristics

Description International standards British standards
Refractoriness under load of 2.105 Pa 1,700°C 3,092°F
Cold crushing strength >300Mpa >43,511psi
Typical bulk density 4.0g/cm3 250pcf

Thermal conductivity curve

Thermal conductivity curve fused cast ER 2010 RIC RT

Storage

The void-free electrofused alumina-zirconia-silica (AZS) with 39% yttria-doped zirconia, ER 2010 RIC RT solution must be stored in a dry environment protected from weather conditions.

Related products

Fused cast

ER 2010 RIC RTD

Void-free electrofused Alumina-zirconia-silica (AZS) tiles with 39% yttria-doped zirconia

Alumina-zirconia-silica (AZS) for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Fused cast

ER 1711® RT

Void-free electrofused alumina-zirconia-silica (AZS) with 40% zirconia solution

Alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.

Fused cast

ER 1685 RT

Void-free electrofused alumina-zirconia-silica (AZS) with 36% zirconia

High corrosion resistance alumina-zirconia-silica (AZS) for simple rectangular shapes. Essentially free of casting cavity which allows a very homogeneous internal structure and corrosion resistance.

Fused cast

ER 1699 RS

End-cast electrofused Alumina-Zirconia-Silica (AZS) with 37% zirconia

High corrosion resistance Alumina-Zirconia-Silica (AZS) for simple rectangular shapes. The very reduced casting cavity and high zirconia content increase resistance to corrosion.

Monolithics

ERPLAST® 20 CEMENT

Alumina-zirconia-silica (AZS) sealing cement

Alumina-zirconia-silica (AZS) cement to seal and joint alumina-zirconia-silica (AZS) surfaces.

Monolithics

ERPLAST® Z PATCH

Zircon sealing patch

Zircon mix to seal joints of mixed material including silica.