MONOFRAX® CS-4 EPIC

Fused cast

End-cast electrofused alumina-zirconia-silica (AZS) with 36% zirconia

High corrosion resistance alumina-zirconia-silica (AZS) solution for simple rectangular shapes. Controlled casting cavity located at the bottom part of the block.
This product is exclusively produced at the Falconer, NY, USA plant.
Equivalent to ER 1685 RR solution.

Typical application Chemical and Physical Properties Storage
Fused cast

Typical application

End-cast electrofused alumina-zirconia-silica (AZS) with 36% zirconia, MONOFRAX® CS-4 EPIC is specifically designed for melting sidewall applications in flame furnaces.

Chemical and Physical Properties

Microstructure

Microstructure CS-4 EPIC

Typical Chemical Composition

 

Physical Characteristics

Description International standards British standards
Refractoriness under load of 2.105 Pa (2kg/cm²) 1,700°C 3,092°F
Cold crushing strength ≥350Mpa ≥50,763psi
Typical bulk density 3.71g/cm3 232pcf

Storage

End-cast electrofused alumina-zirconia-silica (AZS) with 36% zirconia, MONOFRAX® CS-4 EPIC solution must be stored in a dry environment protected from weather conditions.

Related products

Fused cast

ER 1685 RR

End-cast electrofused Alumina-Zirconia-Silica (AZS) with 36% zirconia

High corrosion resistance Alumina-Zirconia-Silica (AZS) for simple rectangular shapes. Controlled casting cavity located at the bottom part of the block.

Go to product
Fused cast

ER 1699 RS

End-cast electrofused Alumina-Zirconia-Silica (AZS) with 37% zirconia

High corrosion resistance Alumina-Zirconia-Silica (AZS) for simple rectangular shapes. The very reduced casting cavity and high zirconia content increase resistance to corrosion.

Go to product
Fused cast

ER 1711® RT

Void-free electrofused alumina-zirconia-silica (AZS) with 40% zirconia solution

Alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.

Go to product
Fused cast

ER 2010 RIC RT

Void-free electrofused alumina-zirconia-silica (AZS) with 39% yttria-doped zirconia

The alumina-zirconia-silica (AZS) material with the highest corrosion resistance for simple rectangular shapes. The only AZS allowing joint closure at operating conditions.

Go to product
Fused cast

ER 1685 RT

Void-free electrofused alumina-zirconia-silica (AZS) with 36% zirconia

High corrosion resistance alumina-zirconia-silica (AZS) for simple rectangular shapes. Essentially free of casting cavity which allows a very homogeneous internal structure and corrosion resistance.

Go to product