SCIMOS CZ DCL

Range
Fused cast
Subtitle

Void-free electrofused zirconia with high electrical resistivity

Description

Excellent corrosion resistance and glass contact properties combined with a high electrical resistivity

Typical application

The void-free electrofused zirconia with high electrical resistivity, SCIMOS CZ DCL solution is used glass-contact. Achieve a high electrical resistivity while providing low blister and stoning potential.

Typically used for electrode blocks, paving and sidewall for electric melting of specialty glasses.

Available for bottom application : SCIMOS CZ DCL TILE

Chemical and physical properties

Microstructure

Image
Microstructure of SCIMOS CZ

Typical chemical composition

 
 

Physical characteristics

Description International standards British standards
Cold crushing strength >500MPa >72,518psi
Refractoriness under load 2 105Pa, 0.5% at 1,800°C 3,272°F
Electrical resistivity at 60Hz at 1,500°C >150ohms.cm 59ohms.inch
Electrical resistivity at 60Hz at 1,600°C >80ohms.cm >31.5ohms.inch
Typical bulk density 5.4g/cm3 337pcf

Thermal conductivity

CONDUCTIVITY CURVE SCIMOS CZ

Storage

The void-free electrofused zirconia with high electrical resistivity, SCIMOS CZ DCL solution must be stored in a dry environment protected from weather conditions.

Related products

Fused cast

Void-free electrofused zirconia with improved high electrical resistivity

Excellent corrosion resistance and glass contact properties combined with a very high and stable electrical resistivity while providing the lowest potential for seed and blister formation.

Fused cast

Void-free electrofused 93% zirconia

Excellent corrosion resistance and glass contact properties with the lowest potential for seed and blister formation.

Fused cast

Void-free electrofused 94% zirconia

Excellent corrosion resistance and glass contact properties with the lowest potential for seed and blister formation.

Fused cast

Void-free electrofused 94% zirconia

Excellent corrosion resistance and glass contact properties.