ERPLAST® 05 CEMENT
Alumina-zirconia-silica (AZS) sealing cement
Fine grains alumina-zirconia-silica (AZS) cement to seal and joint alumina-zirconia-silica (AZS) surfaces.
Typical application
Easy-to-use cement with good malleability at low temperatures. Ideal solution for jointing during construction and repair operations : adhesion of insulation panels, sealing of alumina-zirconia-silica (AZS) blocks and patching tiles or insulation, jointing between tuckstones and sidewalls, etc..
ERPLAST® 05 CEMENT has a good corrosion resistance and good adhesion properties.
Due to its high alumina content it cannot be used in contact with silica. For application with contact with silica check out the ERPLAST® Z PATCH.
Chemical and physical properties
Typical chemical composition
Typical crystallographic analysis
Main phase:
- corundum
- zirconia
Physical characteristics
| Description | International standards | British standards |
|---|---|---|
| Maximum grain diameter | 0.5mm | 35Mesh |
| Typical bulk density | 3g/cm3 | 187pcf |
Instructions of use
Chemical setting with 5 to 6% drinkable water by weight.
Packaging and storage
- 50kg drum
- Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C
Related products
ERPLAST® 20 CEMENT
Alumina-zirconia-silica (AZS) sealing cement
Alumina-zirconia-silica (AZS) cement to seal and joint alumina-zirconia-silica (AZS) surfaces.
ERPLAST® Z PATCH
Zircon sealing patch
Zircon mix to seal joints of mixed material including silica.
A-621
Alumina mortar for sealing and jointing
High alumina heat-setting cement to joint and seal Alumina and alumina-zirconia-silica (AZS) refractories.
HMS-HEATSET
Alumina mortar for sealing and jointing
High alumina heat-setting cement to joint and seal Alumina and AZS refractories.
ER 1711® RT
Void-free electrofused alumina-zirconia-silica (AZS) with 40% zirconia solution
Alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.
ER 1851 RN LOWEX®
Regular cast electrofused Alumina-Zirconia-Silica (AZS) with 36% zirconia and a low silicate phase (14%)
Low exudation and high creep resistance.
Good resistance to alkali vapour and carry over.
ER 1681® RN
Regular cast, electrofused Alumina-Zirconia-Silica (AZS) with 32% zirconia
Good castability Alumina-Zirconia-Silica (AZS) enabling complex and varied shapes and sizes.