ERZIR RAM

Range
Monolithics
Subtitle

Zircon monolithic bottom solution

Description

Zircon ramming mix safety layer with excellent corrosion resistance.

Typical application

ERZIR RAM is a ramming mix used as sub-layer for melter bottoms in hard borosilicate, insulation glass fiber or E-glass furnaces.

ERZIR RAM provides excellent corrosion resistance to reduce risk of glass infiltration.

Chemical and physical properties

Typical chemical composition

 

Typical crystallographic analysis

Main phase: 

  • zircon

Typical characteristics

Description International standards British standards
Maximum grain diameter 5mm 4Mesh
Typical bulk density 3.36g/cm3 210pcf

Instructions of use

Ready-to-use. Chemical setting.

A small amount (0,1 to 0,3% in weight) of drinkable water can be added to obtain the desired plasticity.

Packaging and storage

  • 50kg drum
  • Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C

Related products

Monolithics

Alumina-zirconia-silica (AZS) monolithic bottom solution

Alumina-zirconia-silica (AZS) ramming mix safety layer with high corrosion resistance.

Fused cast

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) paving with fully ground joint faces for tight joint application.

Fused cast

Void-free electrofused Alumina-zirconia-silica (AZS) tiles with 39% yttria-doped zirconia

Alumina-zirconia-silica (AZS) for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Fused cast

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) for paving applications with a wide range of sizes