ERZIR MORTAR

Monolithics

Zircon jointing mortar

Zircon mortar with excellent vapour corrosion resistance.

Typical application Chemical and physical properties Instructions of use Packaging and storage
Monolithics

Typical application

ERZIR MORTAR is used for jointing ZPR and CZ66 sintered zircon bricks in superstructure application.

Chemical and physical properties

Typical chemical composition

 
 

Typical crystallographic analysis

Main phase:

  • zircon

Typical characteristics

Description International standards British standards
Maximum diameter 0.1mm 140Mesh
Typical bulk density 3.27g/cm3 204pcf

Instructions of use

Organic then ceramic setting with 35% drinkable water by weight.

Packaging and storage

  • 25kg bag
  • Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C

Related products

Sintered

ZS1300

Sintered dense zircon

High-purity dense zircon. Excellent glass contact properties with extremely low defect potential.

Go to product
Fused cast

ER 1681® DALLE TJ

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) paving with fully ground joint faces for tight joint application.

Go to product
Fused cast

ER 2010 RIC RTD

Void-free electrofused Alumina-zirconia-silica (AZS) tiles with 39% yttria-doped zirconia

Alumina-zirconia-silica (AZS) for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Go to product
Fused cast

ER 1681® RTD

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) for paving applications with a wide range of sizes

Go to product