PROMOLD MORTAR

Monolithics

Alumina-zirconia-silica (AZS) jointing mortar

Alumina-zirconia-silica (AZS) mortar for PROMOLD superstructure application.

Typical application Chemical and physical properties Instructions of use Packaging and storage
Monolithics

Typical application

 PROMOLD MORTAR is used for laying and repairing PROMOLD and PROMOLD E superstructure assemblies in frits, enamel, sodium silicate furnaces. Use 200kg of PROMOLD mortar per cubic meter of brick construction.

Excellent corrosion resistance to alkali or boron vapors.

Chemical and physical properties

Typical chemical composition

 

Typical crystallographic analysis

Main phase:

  • corundum
  • zirconia

Physical characteristics

Description International standards British standards
Maximum grain diameter 0.5mm 35Mesh
Typical bulk density 2.85g/cm3 178pcf

Instructions of use

Organic/ceramic setting with 15% drinkable water by weight.

Packaging and storage

  • 25kg bag
  • Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C

Related products

Sintered

PROMOLD

Bonded alumina-zirconia-silica (AZS) with 30% zirconia

Made of alumina-zirconia-silica (AZS) grains. High corrosion resistance to alkali or boron vapours. Available in complex and large shapes.

Go to product
Sintered

PROMOLD E

Sintered alumina-zirconia-silica (AZS) with 30% zirconia

Made of alumina-zirconia-silica (AZS) grains. Good resistance to vapours corrosion. Available in standard brick format.

Go to product
Monolithics

ERPLAST® 20 CEMENT

Alumina-zirconia-silica (AZS) sealing cement

Alumina-zirconia-silica (AZS) cement to seal and joint alumina-zirconia-silica (AZS) surfaces.

Go to product