Typical application
ARKAL 65 S is used in:
- mid and lower sections of regenerator chamber walls: partition wall and sidewalls.
- rider arches.
For a upper section of regenerator, refer to ARKAL 71 M, MS 75.
If mortar is required, use MULLITE MORTAR or ARKAL MORTAR.
Chemical and physical properties
Microstructure
Image
Typical chemical composition
Typical crystallographic analysis
Main phase:
- Mullite
- Corundum
Physical characteristics
| Description | International standards | British Standards |
|---|---|---|
| Refractoriness under load of 2 105 Pa at 0,5% | > 1,650°C | >3,000°F |
| Cold crushing strength | 75Mpa | 10878Psi |
| Apparent porosity | 14% | 14% |
| Typical bulk density | 2.55g/cm3 | 159lb/ft3 |
Expansion curve
Thermal conductivity curve
Storage
The sintered sillimanite 65% alumina, ARKAL 65 S solution must be stored in a dry environment protected from weather conditions.