MULLITE MORTAR

Range
Monolithics
Subtitle

Mullite-based jointing mortar

Description

Mullite mortar for superstructure application.

Typical application

MULLITE MORTAR is used for jointing MS 4F sintered mullite bricks in superstructure application.

Use 140kg of MULLITE MORTAR per cubic meter of mullite bricks.

Chemical and physical properties

Typical chemical composition

 

Typical crystallographic analysis

Main phase:

  • corundum
  • mullite

Physical characteristics

Description International standards British standards
Maximum grain diameter 0.2mm 70Mesh
Typical bulk density 2.1g/cm3 131pcf

Instructions of use

Organic/ceramic setting with 25% drinkable water by weight.

Packaging and storage

  • 25kg bag
  • Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C

Related products

Sintered

Sintered mullite 67% alumina

High corrosion resistance to alkali vapours. Excellent creep resistance. Available in complex and large shapes.

Sintered

Sintered mullite 79% alumina

Good corrosion resistance to alkali or boron vapours. Available in standard brick format.

Sintered

Sintered sillimanite 62% alumina

Excellent thermal shock resistance. Available in standard brick format.

Sintered

Sintered mullite 75% alumina

Good corrosion resistance to alkali vapours. Available in standard brick format.

Sintered

Sintered zircon-mullite with 20% zirconia

Made of fused zircon-mullite grains. High resistance to vapours corrosion. Available in standard brick format.

Sintered

Sintered zircon-mullite with 20% zirconia

Made of fused zircon-mullite grains. High resistance to vapours corrosion. Available in complex and large shapes.