Typical application
ERSOL® MAX FLOW is used in combination with ERSOL® 06 CEMENT as a safety layer under ER 1681® DALLE TJ or ER 1681® RTD TILES in bottom paving.
ERSOL® MAX FLOW provides excellent corrosion resistance to reduce risk of glass infiltration and corrosion by polymetallic elements from glass cullet.
Usually installed in two separate layers.
Chemical and physical properties
Microstructure
Image
Typical chemical composition
Typical crystallographic analysis
Main phase:
- corundum
- monoclinic zirconia
Physical characteristics
| Description | International standards | British standards |
|---|---|---|
| Maximum grain diameter | 5mm | 4Mesh |
| Typical bulk density | 3.08g/cm3 | 192pcf |
Instructions of use
Installation instructions
Hydraulic setting with 5.7% (+/-0.1%) drinkable water by weight.
Packaging and storage
- 25kg bag
- Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C