ERSOL® 06 CEMENT

Range
Monolithics
Subtitle

Alumina-zirconia-silica (AZS) cement for bottom solutions

Description

Alumina-zirconia-silica (AZS) cement ensures the flatness between the ERSOL® cast solutions and the ER 1681® tile paving.

Typical application

Easy-to-use organic setting cement to be applied on ERSOL® MAX FLOW or ERSOL® SL concrete safety layers before AZS paving installation.

Its fine grain and narrow grain size distribution ensures a uniform layer.

For vertical applications, refer to ERPLAST® 05 CEMENT.

Chemical and physical properties

Typical chemical composition

 

Typical crystallographic analysis

Main phase:

  • corundum
  • monoclinic zirconia

Physical characteristics

Description International standards British standards
Maximum grain diameter 0.6mm 30Mesh
Typical bulk density 3.1g/cm3 194pcf

Instructions of use

Organic setting with 8% to 10% drinkable water by weight.

Title

Instruction of use

Description
Download the instruction of use guide

Packaging and storage

  • 25kg bag
  • Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C

Related products

Monolithics

Alumina-zirconia-silica (AZS) cement for bottom solutions

Alumina-zirconia-silica (AZS) cement ensures the flatness before ER 1681® paving tiles installation.

Fused cast

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) paving with fully ground joint faces for tight joint application.

Fused cast

Void-free electrofused Alumina-zirconia-silica (AZS) tiles with 39% yttria-doped zirconia

Alumina-zirconia-silica (AZS) for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Fused cast

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) for paving applications with a wide range of sizes

Fused cast

Void-free electrofused alumina-zirconia-silica (AZS) with 40% zirconia solution

Alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.