ERSOL® SL CAST

Range
Monolithics
Subtitle

Alumina-zirconia-silica (AZS) monolithic bottom solution

Description

Alumina-zirconia-silica (AZS) concrete safety layer with high corrosion resistance and self-placing properties.

Typical application

ERSOL® SL CAST is used in combination with ERSOL® 06 CEMENT as a safety layer under ER 1681® DALLE TJ or ER 1681® RTD TILES in bottom paving.

ERSOL® SL CAST has a superior corrosion resistance with good thermal expansion behaviour to reduce risk of glass infiltration and corrosion by polymetallic elements from glass cullet.

Usually installed in two separate layers.

Read Technical Article

Chemical and physical properties

Microstructure

Image
ERSOL SL CAST microstructure

Typical chemical composition

 

Typical crystallographic analysis

Main phase:

  • corundum
  • monoclinic zirconia

Physical characteristics

Description International standards British standards
Maximum grain diameter 5mm 4Mesh
Typical bulk density 3.15g/cm3 197pcf

Instructions of use

Hydraulic setting with 6% (+/-0.1%) drinkable water by weight.

Title

Instructions of use

Description
Download the instruction of use guide

Packaging and storage

  • 25kg paper bag
  • Must be properly stored up to expiry date in undamaged original sealed packaging, in dry conditions at temperatures between +5°C and +40°C

Related products

Monolithics

Alumina-zirconia-silica (AZS) cement for bottom solutions

Alumina-zirconia-silica (AZS) cement ensures the flatness between the ERSOL® cast solutions and the ER 1681® tile paving.

Monolithics

Alumina-zirconia-silica (AZS) monolithic bottom solution

Alumina-zirconia-silica (AZS) concrete safety layer with high corrosion resistance and self-placing properties.

Fused cast

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) paving with fully ground joint faces for tight joint application.

Fused cast

Void-free electrofused Alumina-zirconia-silica (AZS) tiles with 39% yttria-doped zirconia

Alumina-zirconia-silica (AZS) for paving applications with a wide range of sizes. The only AZS allowing joint closure at operating conditions.

Fused cast

Void-free electrofused Alumina-Zirconia-Silica (AZS) tiles with 32% zirconia

Alumina-Zirconia-Silica (AZS) for paving applications with a wide range of sizes

Fused cast

Void-free electrofused alumina-zirconia-silica (AZS) with 40% zirconia solution

Alumina-zirconia-silica (AZS) material with highest corrosion resistance and good castability for various shapes and sizes. It is essentially free of casting cavities and allows a very homogeneous internal structure and corrosion resistance.